Luxury Arizona home interior with restored tile, grout and natural stone surfaces
    Skip to main content

    Professional Travertine Restoration in Arizona

    IICRC Certified • 15-Year Warranty on Grout Sealer • 24-Hr Reply

    Quick Answer

    How much does travertine restoration cost in Arizona, and what does it include?

    Travertine restoration in Arizona starts at $5.00 per square foot and includes grinding out scratches and lippage, filling open pits and holes, honing or polishing to the finish you want, and sealing the stone. Most East Valley travertine floors are restored in one to two days.

    Choose the right care and finish for your stone

    Do travertine pits mean my floor is defective?

    Not necessarily. Travertine naturally contains voids, and factory filler can wear or loosen. A stone assessment distinguishes natural pits from cracking, loose tile and substrate movement. Filling selected voids can improve cleanability, but the choice to retain a textured appearance or pursue a smoother finish belongs in the written scope.

    Explore stone finish and flattening options

    Should I choose honed travertine or a mirror finish?

    A honed finish has lower sheen; a polished finish reflects more light and makes changes in reflection more visible. Both can scratch and etch. Choose with your lighting, desired appearance and maintenance habits in mind. Polishing is not a promise of stain resistance or slip safety, especially around water.

    Send photos of your stone floor

    Will a sealer stop vinegar from etching my stone?

    No. A penetrating sealer helps resist absorption and staining; it does not stop acid reacting with calcite-based travertine. Use a stone-safe pH-neutral cleaner and remove spills promptly. Grout color sealing comes with a 15-year warranty for homeowners. It covers the color sealer, not the tile, the installation underneath or other surfaces. Commercial work is not covered by the 15-year warranty.

    Compare warranty coverage with stone care

    Does polishing also remove raised tile edges?

    Not automatically. Lippage removal is a separate flattening operation requiring assessment of the installation, stone thickness and surrounding transitions. Travertine restoration starts at $5.00 per square foot; repairs start at a $1,500 minimum day rate. The written quote identifies filling, flattening and the chosen finish instead of treating them as interchangeable.

    Discuss travertine restoration in Gilbert

    Professional Travertine Restoration Services

    Travertine is one of the most beautiful natural stones, but Arizona's harsh desert climate and hard water can take a toll on its appearance. At Lazona Tile Care, we specialize in restoring travertine floors, showers, and countertops to their original elegance.

    Our comprehensive travertine restoration process includes professional honing to remove scratches and etching, diamond polishing to restore natural luster, hole filling with color-matched materials, and penetrating sealer application for long-lasting protection.

    Whether your travertine has lost its shine, developed unsightly holes, or shows signs of wear from years of foot traffic, our IICRC-certified technicians have the expertise to bring it back to life. We've restored thousands of travertine surfaces across the Phoenix Valley since 2016.

    Our Travertine Restoration Process

    1

    $150 Consultation

    We assess your travertine's condition and provide a detailed quote during a $150 consultation. Actual test spots cost $250, credited if booked.

    2

    Surface Preparation

    Thorough cleaning and degreasing to remove contaminants that could affect restoration quality.

    3

    Hole & Crack Filling

    Color-matched epoxy or travertine fill is applied to holes and cracks for seamless repair.

    4

    Honing & Polishing

    Diamond abrasives progressively refine the surface from 100-grit through 3000-grit for your desired finish.

    5

    Sealing & Protection

    Premium penetrating sealer is applied to protect against stains, moisture, and daily wear.

    Frequently Asked Questions

    Lazona Tile Care runs travertine crews out of 3100 W Ray Rd in Chandler, which puts us within about 30 minutes of most East Valley travertine. We cover Chandler, Gilbert, Mesa, Tempe, Ahwatukee, Queen Creek, San Tan Valley, Scottsdale and Paradise Valley. There is no trip charge in Chandler, Mesa, Gilbert or Tempe; Scottsdale and Paradise Valley carry a $150 trip charge.

    Yes. Chipped edges, cracked tiles, spalling around pool decks, hollow tiles and blown-out holes are repair work rather than cleaning work. Travertine and stone repair starts at $1,500 regardless of size, and we usually repair first, then hone and polish so the patch disappears into the surrounding floor.

    Travertine restoration typically starts at $5.00 per square foot for basic honing and sealing. Full restoration with hole filling and high-polish finish ranges from $8-15 per square foot depending on condition.

    Most residential travertine floors can be restored in 1-2 days. Larger projects or severely damaged surfaces may require additional time. Your floors are typically ready for light use within 24 hours.

    We recommend professional cleaning and resealing every 2-3 years, with full restoration as needed, typically every 5-10 years depending on traffic and wear.

    Yes! We restore travertine pool decks, patios, and walkways. Outdoor travertine requires specialized techniques to address weathering, algae, and UV damage.

    Travertine Restoration Pricing

    Starting at $5.00/sqft

    Every project is unique. Book a $150 consultation for an exact written quote.

    Book A Consultation
    IICRC Certified Technicians
    15-Year Warranty
    $150 Consultations

    We Provide Travertine Restoration Throughout Arizona

    ChandlerGilbertMesaQueen CreekScottsdaleParadise ValleyAhwatukeeTempe
    View All Service Areas →

    Related Reading

    Learn how to protect your investment between professional services.

    How to Maintain Natural Stone Floors

    Travertine restoration options for Mesa homeowners

    Mesa hard water runs 12 to 17 grains per gallon, and as it dries it etches travertine over the years. Options range from cleaning and honing to a full grind, polish, hole filling and sealing. See travertine restoration options in Mesa.

    Restoration & Preservation

    Why Cleaning Only Was Not Cutting It

    After thousands of East Valley homes, we kept seeing the same pattern: cleaning tile, stone, showers, and counters looked great on the day of service, then the grout darkened, the stone dulled, and the hard water came back. So we stopped selling cleaning as the finish line and rebuilt the company around restoration and preservation, with a written guarantee on the result.

    What cleaning alone leaves behind

    • The grout goes right back to gray

      Cement grout is a sponge. A cleaning-only company extracts the dirt sitting in the pores, then hands the floor back with those pores wide open. Within weeks of mopping, foot traffic, and Arizona dust, the joints darken again.

    • Permanent staining does not respond to pressure

      Once grout has absorbed grease, dye, pet accidents, or years of dirty mop water, no amount of heat or PSI brings the color back. The stain is inside the cement, not on top of it.

    • Clear sealers wear off in 12 to 24 months

      The upsell after a cleaning is usually a clear penetrating sealer. It is invisible, it does nothing for uneven color, and you are paying to reapply it every year or two forever.

    • Damage gets cleaned over instead of repaired

      Cracked joints, missing grout, hollow tile, etched marble, and hard water buildup are structural problems. Cleaning around them means the failure keeps progressing under a clean-looking surface.

    The Lazona restorative approach

    1. 1

      Repair first

      Failed grout is removed and replaced to solid substrate. Hollow or loose tile is re-bonded, chips are filled, travertine pits are color matched.

    2. 2

      Restore the surface itself

      Deep extraction on tile and grout, diamond honing and polishing on natural stone, acid-free descaling and glass restoration in showers, refinishing on counters. We correct the surface instead of masking it.

    3. 3

      Preserve it with a warranty

      Grout is permanently color sealed, stone is sealed or coated for its use case, glass gets a protective treatment. Grout color sealing comes with a 15-year warranty for homeowners. It covers the color sealer, not the tile, the installation underneath or other surfaces. Commercial work is not covered by the 15-year warranty.

    The Never Seal Again Guarantee

    Grout color sealing comes with a 15-year warranty for homeowners. It covers the color sealer, not the tile, the installation underneath or other surfaces. Commercial work is not covered by the 15-year warranty.

    Routine care still matters. Use the cleaner and maintenance guidance provided for your surfaces.

    Transparent Pricing

    What It Actually Costs

    Real starting prices, published up front. In-home consultations cost $150. Photos help us prepare and do not replace the consultation. You get a written quote before work starts.

    Tile & Grout Cleaning

    Starts at $1.00/sqft

    Truck-mounted hot water extraction on tile, grout, and edges. Heavier soil, natural stone, and detail work can price higher.

    Grout Color Sealing

    From $3.00/sqft

    Grout color sealing comes with a 15-year warranty for homeowners. It covers the color sealer, not the tile, the installation underneath or other surfaces. Commercial work is not covered by the 15-year warranty. Quoted after the floor is measured.

    Grout & Tile Repair

    $1,500 minimum day rate

    Cracked, crumbling, or missing grout, hollow tile re-bonding, and chip repair. Every repair visit starts at $1,500 no matter the size. Full regrouting priced by area.

    Natural Stone Polishing

    $2 - $15/sqft

    Diamond honing and polishing on marble, travertine, limestone, and granite. Price depends on grit sequence, damage, and target finish.

    Countertop Restoration

    Starting at $1,000

    Refinishing, etch and scratch removal, seam and chip repair, plus sealing on stone kitchen and vanity tops.

    Shower Restoration

    Quoted per shower

    Hard water and mineral removal, glass restoration, regrouting, and permanent color sealing of every joint.

    Minimum service charges apply. Trip charges apply outside Chandler, Mesa, Gilbert, and Tempe. Pricing reflected here is for East Valley residential work in 2026. See our full pricing guide for typical project ranges and what moves a quote.

    Send Photos Before Your Consultation

    Upload 1 to 3 pictures of your tile, grout, shower, stone, or counters to help us prepare for your $150 consultation. Actual test spots cost $250, credited toward your total if you book. We no longer offer free estimates. Our team will confirm appointment availability.

    Ready to Restore Your Surfaces?

    Contact Lazona Tile Care today for your $150 consultation. Our certified technicians are ready to help.

    Call (480) 352-0392

    Material Intelligence

    Every Surface In Arizona Fails Differently. We Diagnose Before We Touch It.

    Anyone can rent a machine and spray a sealer. Restoration is a materials science problem: what the stone is made of, what our water and sun do to it, and which grit or chemistry brings it back without shortening its life. Here is the reference table our crews work from on every East Valley job.

    Material properties, Arizona-specific failure modes and Lazona restoration protocols
    MaterialHardness / porosityHow it fails hereOur protocol
    TravertineMohs 3 to 4 (calcite)Open vugs fill with hard water scale, then spall at the edgesFill voids with color-matched polyester, hone at 400 grit, seal with an impregnator
    Marble & limestoneMohs 3 (calcite)Acid etching from citrus, softener salt and shampoo pooling100 grit only when erosion is present, then 400 to 3000 grit polish to the original finish
    Granite & quartziteMohs 6 to 7Sealer failure around sinks, rust bleed at anchor points, dull seamsDiamond re-polish, epoxy seam rebuild, sink remount, solvent-based impregnator
    Porcelain & ceramicMohs 7 to 8 glazeGrout absorbs pigment permanently while the tile itself stays perfectDeep clean, repair, then pigmented epoxy color seal so the grout never absorbs again
    Saltillo & terracottaSoft, high porosityYellowed acrylic topical wax that cracks and traps dirt under the coatingFull strip of the old coating, neutralize, rebuild with breathable finish coats
    Slate & flagstoneMohs 3 to 5, cleft faceUV bleaching and delamination on pool decks and patiosLow-pressure deep clean, flake removal, color-enhancing sealer rated for exterior sun

    East Valley Water Hardness, City By City

    Anything above 10 grains per gallon is classified very hard. Every city we serve sits well past that line, which is why scale returns on showers and why unsealed grout turns gray again within months.

    • Chandler15 to 18 gpg
    • Gilbert16 to 20 gpg
    • Mesa14 to 18 gpg
    • Tempe13 to 17 gpg
    • Scottsdale12 to 16 gpg
    • Queen Creek17 to 22 gpg

    The Standards We Build To

    • TCNA Handbook movement joint and substrate guidance, which is how we prove whether hollow tile is an installation defect or normal wear.
    • ANSI A108 and A118 bonding and grout specifications for every repair and re-set we perform.
    • Natural Stone Institute finish classifications so a honed floor leaves honed and a polished floor leaves polished.
    • 15-Year Warranty, which is the only reason we refuse shortcuts other companies sell as savings.

    We value your privacy

    We use cookies to make our site work, analyze traffic, and improve our advertising. You can accept all, reject non-essential, or manage preferences. See our Cookie Policy and Privacy Policy.

    CALL NOWBook A Consultation
    Chat
    Powered by CloseBot
    Hi! What can we help you restore today?